The function of the bearing coordination is to make the stationary ring and rotating ring of the bearing solidify with the stationary part (usually the bearing seat) and the rotating part (usually the shaft) of the mounting part respectively, so as to realize the load transfer and the limited movement in the rotating state. The basic task of the system relative to the position of the stationary system. On the shaft and in the bearing seat, rolling bearings are required to fix their positions in three directions: radial, axial and tangential directions. Radial and tangential positioning are achieved through tight-fitting of bearing rings. Axial positioning is only used in a few cases with tight-fitting; generally axial limiting parts, such as end caps and retaining rings, are used to limit the axial position Within the clearance range.

The function of the Deep Groove Ball Bearing is to make the stationary ring and rotating ring of the bearing solidify with the stationary part (usually the bearing seat) and the rotating part (usually the shaft) of the mounting position, so as to realize the load transfer in the rotating state. And the basic task of defining the position of the motion system relative to the stationary system. On the shaft and in the bearing seat, rolling bearings are required to fix their positions in three directions: radial, axial and tangential directions. Radial and tangential positioning are achieved through tight-fitting of bearing rings. Axial positioning is only used in a few cases with tight-fitting; generally axial limiting parts, such as end caps and retaining rings, are used to limit the axial position Within the clearance range.

Deep groove ball bearings are important parts of machinery, or they can be said to be mechanical joints. Just like us humans, it won’t work if there are no joints. If people don’t have joints, they will be paralyzed. What is the role? Then it is useless. The same is true for machinery. Without the bearing, the machinery cannot be used. Therefore, the machinery cannot be separated from the bearing. Without the bearing, it cannot survive, which is equivalent to a waste product. The use of bearings is very complicated, and some rolling bearings need to be used in conjunction. This knowledge that ordinary technicians only know, we ordinary people must not know it. Let’s introduce the use and requirements of this rolling bearing for everyone. , And also know the basics for you to be familiar with bearings in the future.

The following four points should be paid attention to when choosing cooperation:

The circumferential surface of the deep groove ball bearing ring should have good support and uniform force to reduce deformation and give full play to the bearing capacity.

The ferrule cannot slide in the tangential direction on its mating surface, otherwise, the mating surface will be damaged.

The free end bearing must be able to adapt to the change in the length of the shaft and the bearing seat hole, that is, it must have the ability to adapt to the axial position to swim within a certain range.

Attention must be paid to make the bearing installation and disassembly simple and convenient, saving labor, time and expenditure.

NINGBO MOSHENG BEARING CO., LTD. is a Deep Groove Ball Bearings Manufacturer with a variety of Deep Groove Ball Bearings products, welcome to visit our official website.